Gadgets Motor Controller

Gadgets Motor Controller
Here is a circuit used to control engine more proficiently than any electromagnetically controlling gadget. The venture appeared here is shoddy and simple to develop. It likewise defeat the issue of commotion activating and clamor beat.
Circuit portrayal
The power supply is given by squeezing switch SW1 it shots the N/O contact of hand-off RL¬1 which offers supply to the circuit. The current through resistor R8 gives the base current to transistor T5. 

Where transistor T1, T2 and T3 from the over and under-voltage shorts. Here the transistor T4 on when over or under voltage is given to transistor T3. For maintaining a strategic distance from clamor capacitor C2 with resistor R10 frame a misfortune pass channel furthermore give adequate time delay. Here the resistor arrange (R11, R12, VR1) are utilized as present sensor. Where Diode D3 is as rectifier and capacitor C1 is utilized as clamor channel of exchanging circuit. 

Resistors (all ¼-watt, ± 5% Carbon)
R1 = 150 Kω; R2 = 33 Kω; R3 = 6.7 Kω; R4 = 100 Kω; R5 = 39 Kω; R6 = 15 Kω; R7 = 10 Kω; R8 = 4.7 Kω; R9 = 75 Ω/1W; R10, R13 = 47 Kω; R11 = 470 Ω; R12 = 0.5 Ω; VR1 = 2.2 Kω 

C1 = 1000 μF/25V; C2, C3 = 47 μF/10V 

T1, T2, T3, T4 = BC148; T5 = SL100; D1, D2, D3 = 1N4001; ZD1, ZD2 = 3.1V; ZD3 = 9.1VIncidental SW1, SW2 = Push to on switch X1 = 230 essential AC essential to 18-0-18, 500mA optional transformer On the other hand (110 essential AC essential to 18-0-18, 500mA optional transformer) RL1 = 12V, 200 Ω Double shaft twofold toss
M = Motor


Popular Posts

Short Speech on Independence Day in Malayalam

Eye Directive Wheelchair